Raleigh NC Painter

I repaired wood rot on the exterior window sills of a home. The rot had spread across three sills. After cutting away the damaged wood, I used an epoxy wood filler to fill in the gaps, shaping it to match the existing profile. Once dried, I sanded it smooth using a Makita orbital sander. I then primed the repaired areas with Zinsser Cover Stain oil-based primer and finished with a top coat of Sherwin-Williams Emerald Exterior paint for durability.

I painted the living room of a home today. The walls were prepped with a light sanding using 120-grit sandpaper, followed by wiping them down with a damp microfiber cloth to remove dust. I applied two coats of Benjamin Moore Regal Select Interior paint in an eggshell finish using a Wooster Pro brush for the edges and a Purdy White Dove roller for the walls. The project turned out great, and the color choice brightened the space significantly.

I worked on painting the siding of a two-story home. The existing paint had started to peel, so I first pressure-washed the siding using a Ryobi electric pressure washer to remove loose paint and dirt. After it dried, I applied a coat of Behr Premium Plus Exterior paint using a Graco airless sprayer. The sprayer allowed for even coverage on the lap siding, and I followed up with a Wooster Pro brush to touch up corners and seams.

I repaired wood rot on the exterior siding of a home. I removed the damaged wood and replaced it with new cedar planks. I then primed the area with an oil-based primer to seal the wood and prevent future rot. After sanding smooth, I painted the section with exterior paint in satin. I used a Wooster Silver Tip brush for precise application along the edges and seams.

I took on a brick exterior painting project today. First, I cleaned the brick using a stiff wire brush to remove debris and loose mortar. I then applied a masonry primer with a roller and followed up with two coats of Behr Elastomeric Paint. This paint allows for expansion and contraction with temperature changes, providing long-lasting coverage. The bricks now have a modern, uniform look.

Today, I painted a garage floor using epoxy coating. I began by thoroughly sweeping and cleaning the surface with a pressure washer. Once dry, I applied Rust-Oleum EpoxyShield in a gray color, using a roller with an extension pole for an even finish. I also added decorative flakes and a non-slip additive for safety. The epoxy provided a sleek, durable finish that will withstand heavy use.

I addressed wood rot on a deck railing by removing the damaged wood and replacing it with pressure-treated lumber. Used galvanized screws to secure the new pieces and sanded them smooth. Primed the repaired sections with Zinsser Cover-Stain Primer and finished with an exterior-grade paint to match the rest of the deck, ensuring long-term protection.

I coated a garage floor with Behr Premium 1-Part Epoxy Concrete and Garage Floor Paint. Cleaned the concrete surface thoroughly, filling in cracks with a concrete patching compound. Rolled on the epoxy coating, ensuring even coverage and adding slip-resistant flakes for safety. The garage floor is now more durable and has a professional finish.

I painted the shutters and front door of a home using PPG Timeless Exterior Paint in a semi-gloss finish. Removed the shutters for easier access and lightly sanded the door to prepare the surface. Applied two coats of paint with a brush for the door and a sprayer for the shutters. The entryway now has a fresh, inviting appearance.

I painted the kitchen and dining room using Behr Premium Plus Ultra in an eggshell finish. Started by removing old wallpaper and sanding the walls. Applied a primer to cover any stains and ensure proper adhesion. Used a combination of brushes and rollers to apply two coats of paint, resulting in a clean, updated look.

I repaired wood rot on a window frame using Bondo Wood Filler. Removed the rotted sections and treated the area with a wood hardener to prevent further damage. After applying the filler, I sanded it smooth and primed the surface with Kilz Premium Primer. The frame was then painted with an exterior paint to match the existing trim.

I prepped and painted a garage floor using Rust-Oleum EpoxyShield Garage Floor Coating. First, I cleaned the concrete thoroughly, etched it with an acid solution, and patched any cracks. Applied the epoxy coating with a roller, starting from the back and working towards the exit. The floor now has a durable, high-gloss finish that resists stains and chemicals.

I painted the exterior siding of a two-story home using Benjamin Moore Aura Exterior Paint in a low-luster finish. Pressure-washed the surfaces beforehand to remove dirt and mildew. Afterward, I scraped and primed areas with peeling paint. Applied two coats of the paint using a Graco airless sprayer, ensuring an even and protective finish that will withstand the elements.

I prepped and painted the living room and hallway using Sherwin-Williams SuperPaint in a satin finish. First, I patched any holes and sanded rough spots before applying a primer coat to ensure even coverage. Then, I used a roller with a 3/8" nap for the walls and a brush for the trim. The result is a smooth, durable finish that refreshed the space.

Completed a kitchen painting project with a focus on precision and quality. Prepped the walls by filling any imperfections, sanding, and applying a primer to ensure a smooth, even base. Chose Benjamin Moore Aura Interior paint for its superior coverage and washability, ideal for high-traffic areas like the kitchen. Carefully cut in around cabinets, appliances, and fixtures, then rolled the walls for a flawless finish. For expert kitchen painting services, contact us to give your space a fresh, vibrant look.

Completed a comprehensive painting project for a garage interior and floor. Prepped the walls and ceiling by filling holes, sanding, and applying a primer to ensure a smooth finish. Used Benjamin Moore Ultra Spec for the walls, providing excellent durability and a clean look. For the floor, we cleaned and etched the surface before applying Rust-Oleum EpoxyShield, which offers superior resistance to chemicals and wear. For professional garage painting services, contact us to transform your space with a durable and attractive finish.

Completed a painting project in the hallway and master bedroom with expert precision. Prepped the walls by patching holes, sanding, and applying a high-quality primer to ensure a smooth, uniform surface. Used Benjamin Moore Regal Select paint for its excellent coverage and durability. Carefully cut in around ceilings, trim, and fixtures, then rolled the walls for a flawless finish. The end result is a refreshed, elegant look. For professional interior painting services, contact us to transform your home with superior craftsmanship.

Completed a professional garage floor painting project. First, thoroughly cleaned and etched the concrete surface to ensure proper adhesion. Applied a high-quality epoxy primer to seal the surface, followed by two coats of Rust-Oleum EpoxyShield for a durable and glossy finish. Ensured even application with precision edging and roller techniques. This coating not only enhances the appearance but also provides excellent resistance to chemicals and abrasions. For expert garage floor painting services, contact us to transform your space with a professional finish.

Executed interior refinishing project in ground floor lavatory. Applied Sherwin-Williams Duration Home Interior Acrylic Latex in Eggshell finish to walls, ensuring superior hide and durability. Utilized 3/8" nap roller for smooth application and minimal stipple. For trim work, employed Purdy XL Elite 2.5" angled sash brush to apply Benjamin Moore Advance Interior Semi-Gloss, providing excellent flow and leveling. Performed meticulous surface preparation, including sanding with 220-grit paper and applying Zinsser Bulls Eye 1-2-3 primer for optimal adhesion. Executed precise cutting-in techniques along ceiling lines and corners. Final result showcases flawless finish with crisp, clean lines throughout the bathroom space.

Conducted site evaluation for exterior painting of 3,500 sq. ft. two-story brick home, transitioning from natural red to white. Recommended Loxon XP masonry coating for superior adhesion and moisture resistance. Calculated 55 gallons needed for two-coat coverage at 4-6 mils DFT. Specified high-pressure washing at 3000 PSI to remove efflorescence and contaminants. Planned for application using airless sprayer with .021 tip for optimal atomization. Included cost for scaffolding rental to access upper levels safely. Estimated 120 labor hours, factoring in extensive masking of windows, doors, and adjacent surfaces. Advised on potential for ghosting due to mortar lines and recommended elastomeric caulking for all expansion joints.

Completed an interior painting project for the kitchen and breakfast room. Prepared surfaces by cleaning, sanding, and applying primer to ensure optimal paint adhesion. Used high-quality, low-VOC paint for better indoor air quality and durability. Applied two coats of paint on walls, ceilings, and trim, ensuring smooth, even coverage with brushes and rollers. Carefully cut in around cabinets, windows, and fixtures for a clean, professional finish. The kitchen and breakfast room now have a fresh, updated look, enhancing the overall appeal and functionality of the space.

Performed comprehensive site survey for exterior trim repainting of 14-unit residential complex. Assessed 3,200 linear feet of fascia, 1,800 linear feet of window trim, and 280 linear feet of doorways. Identified areas of wood rot, estimating 200 linear feet requiring replacement with PVC boards. Specified Sherwin-Williams Resilience exterior acrylic latex paint for durability in coastal climate. Calculated paint requirements: 40 gallons for two-coat coverage. Factored in 25 gallons of oil-based primer for bare wood and previously painted surfaces. Estimated 320 labor hours for surface preparation, including pressure washing, scraping, sanding, and caulking. Included rental of 60-foot articulating boom lift for upper level access. Provided detailed breakdown of materials, labor, and equipment costs in final quotation.

Executed interior painting project for master bedroom and bathroom. Applied one coat of Sherwin-Williams PrepRite ProBlock Latex Primer to walls using a 3/8-inch nap roller. For finish coats, utilized Emerald Interior Acrylic Latex in eggshell sheen for bedroom walls and Duration Home Interior Acrylic Latex in semi-gloss for bathroom. Employed HVLP sprayer for crown molding, using Benjamin Moore Advance Waterborne Interior Alkyd in satin finish. Masked adjacent surfaces with 3M ScotchBlue painter's tape and plastic sheeting. Caulked gaps between crown molding and ceiling with DAP Alex Plus acrylic latex caulk. Filled nail holes in molding with wood filler, sanded smooth after drying. Spot-primed repairs before final coat. Achieved uniform coverage with two coats, allowing proper drying time between applications.

Completed painting of the garage floors and FROG (Finished Room Over Garage). Prepared surfaces by cleaning and etching with muriatic acid for proper adhesion. Applied a concrete primer to seal and bond with the surface. Finished with two coats of epoxy paint for durability and resistance to chemicals and abrasion. Achieved a smooth and glossy finish using professional-grade tools and techniques. The garage floors and FROG now boast a durable and attractive coating.

Completed painting of the front bedroom. Prepared surfaces by cleaning, sanding, and filling cracks with wood filler. Applied a coat of high-quality primer to promote adhesion and even coverage. Finished with two coats of premium interior paint for a smooth and durable finish. Also replaced damaged wood on the back porch, ensuring structural integrity and aesthetics.