Today I was assigned to a wood rot repair job on a window trim for a residential home. Upon inspection, I found that the lower sections of the trim were badly deteriorated due to years of water exposure. The rot had spread deeper than expected, making it impossible to simply patch. To solve the issue, I carefully removed all the damaged wood and cut replacement pieces to match the original trim profile. I then treated the surrounding wood with a wood hardener to prevent future decay and installed the new sections using waterproof wood glue and exterior-grade nails. After sealing all joints with caulk, I primed and painted the area to match the rest of the trim. The repair blended in well and restored both the appearance and integrity of the structure.

checking in on the wood rot repair project. While inspecting the trim around the windows, I found additional areas of rot that weren’t visible initially, likely from prolonged moisture exposure. To fix this, we’ll remove the damaged wood, treat the surrounding area to prevent further decay, and install new rot-resistant material. This will ensure a solid, long-lasting repair and help protect your home from future issues.

Today, I painted a bathroom in Apex, NC. The walls were prepped by filling small holes and sanding smooth. I applied a coat of moisture-resistant primer, followed by two coats of satin finish paint to handle humidity. I used a 2.5-inch angled brush for clean edges around the fixtures and trim.

I completed exterior brick painting for a home in Apex, NC. The brick was first cleaned using a pressure washer to remove dirt and grime. Once dry, I applied a masonry primer to ensure proper adhesion. After the primer cured, I used a paint sprayer to evenly coat the brick with acrylic latex paint, applying two coats for durability and weather resistance. I followed up by hand-painting the trim around the windows for a clean, detailed finish. The brick now has a bold, modern look that complements the home.

I painted the living room walls for a client in Apex, NC. I patched small holes and cracks in the drywall before sanding for a smooth finish. I used a roller to apply two coats of low-sheen paint, providing a soft, durable finish. I also painted the trim with semi-gloss enamel for added contrast. The living room now looks refreshed with a clean, modern appearance.

Today, I repaired wood rot on the trim of a front door. I removed the damaged sections and replaced them with new treated wood. After installation, I primed the area with a Kilz oil-based primer, ensuring proper adhesion, then sanded it smooth with a DEWALT palm sander. I completed the job with a top coat of Benjamin Moore Aura Exterior paint to match the existing trim.

I painted the garage floor today. The old surface was worn and had several stains. First, I cleaned the floor thoroughly with a degreaser and then etched the concrete with Rust-Oleum concrete etch. After it dried, I applied Rust-Oleum EpoxyShield Garage Floor Coating using a roller and Wooster extension pole. The epoxy provided a durable finish, and I added anti-slip flakes for safety. The floor looks brand new now.

I completed an exterior painting project on brick & siding today. The brick was in good condition but needed a refresh. I used a masonry primer from Behr before applying two coats of Sherwin-Williams Loxon XP paint, specifically designed for brick surfaces. I used a Graco Ultra Max II airless sprayer for even coverage, and the result was a clean, updated look.

I painted the trim and fascia of a home using Sherwin-Williams Duration Exterior Paint in a satin finish. Scraped off any loose paint and applied a primer to exposed wood areas. Used a high-quality brush to apply two coats, ensuring that the trim was well-protected and visually appealing. The finish will help protect the wood from weathering.

I painted the bedrooms using Valspar Signature Interior Paint in a matte finish. Prepared the walls by filling in nail holes and sanding any rough areas. After applying a primer, I used a 9-inch roller with a 1/4" nap for smooth coverage. The final result is a uniform and fresh appearance throughout the bedrooms.

We recently completed a professional painting of a three-car garage floor. The process began with thorough surface preparation, including degreasing, etching, and repairing any cracks. We applied a high-performance epoxy coating, chosen for its durability and resistance to chemicals, abrasion, and stains. The epoxy was meticulously mixed to ensure a uniform application, providing a seamless and glossy finish. This coating not only enhances the garage's appearance but also offers long-lasting protection against wear and tear. For optimal results, we recommend allowing the surface to cure for at least 72 hours before heavy use.

Completed exterior preparation for a two-story colonial residence in Apex. Pressure washed all surfaces at 2500 PSI to remove dirt and loose paint. Scraped and sanded areas of peeling paint, feathering edges for smooth transition. Applied elastomeric caulk to all joints and seams. Repaired wood rot on fascia boards, replacing 12 linear feet with pre-primed cedar. Spot-primed bare wood and caulked areas with oil-based primer. Masked windows, doors, and architectural features with 3M blue tape and plastic sheeting. Covered landscaping with drop cloths. Conducted lead paint test on pre-1978 surfaces, results negative. Set up Werner 32-foot extension ladder with standoffs for upper level access. Prepared 5-gallon buckets of Sherwin-Williams Duration exterior paint in satin finish for application tomorrow.

Completed painting of the garage floor. Prepared surface by cleaning thoroughly and etching with muriatic acid to ensure adhesion. Applied epoxy primer to seal and bond with the concrete. Finished with two coats of high-quality epoxy paint for durability and resistance to chemicals and abrasion. The garage floor now boasts a durable and attractive finish.

I'm in Apex, painting the trim on the front porch, completing the exterior update project. I used a durable, exterior-grade acrylic latex paint designed for trim, ensuring long-lasting protection against the elements. Precision was key, so I applied painter’s tape for clean edges. Each section of trim received two coats, applied with a high-quality angled brush for meticulous detail. The result is a refreshed and polished appearance for the entire porch.

Recently completed an exterior paint job for a customer's 2100 sq foot home in Apex, NC. We thoroughly prepped surfaces by power washing and repairing any imperfections. Using a classic shade of "Slate Gray" paint, we applied two coats for optimal coverage and durability. The home now boasts a refreshed appearance, enhancing its curb appeal in the neighborhood.

In Apex, NC, I addressed scuff marks and wear while performing interior paint touch-ups in a home. Focused on restoring the living room and bedrooms, I restored them to their original condition. Using a serene shade of "Drift of Mist" paint, I ensured a refreshed appearance throughout the house.

Just completed painting the kitchen and dining rooms for a valued customer in Apex, NC. Before starting, I prepared the areas by covering furniture and flooring to protect them from paint splatters. I also filled any wall imperfections and sanded surfaces for a smooth finish. Using a warm shade of taupe paint, I applied multiple coats evenly for a cozy ambiance. The customer was thrilled with the transformation!

Undertook an exterior painting project, enhancing the curb appeal of a residence with a new coat of paint. The updated exterior color not only improved aesthetics but also added a layer of protection against the elements.

Interior Refresh - Living Room: Completed a full interior repaint of the living room in a classic beige to brighten the space. Applied two coats for optimal coverage and smooth finish, ensuring a seamless transition from the previous color. Client satisfied with the transformation, reporting a warmer and more inviting atmosphere.

Provided exterior painting for a customer whose house color had faded. Previously went and colored matched the house. Pressured washed and then painted with the matched the color. The customer was very happy to have their house looking vibrant again.

Residential customer called about wood rot around the windows on the outside of their house. Replaced the wood around the windows and recaulked to secure. The customer was happy to have the rotted wood removed.

Interior paint job - paint two bedrooms in a residential home. Returning customer, previously provided free estimate.

Interior paint job for Apex, NC residential customer. Best local painter R&D Painting servicing the Triangle Area.

Paint kitchen of residenital home in Waterford Green neighborhood of Apex NC.

Garage floor painting services in Apex NC - Clean and paint with industrial strength floor coating material for residential customer with two car garade in Waterford Green neighborhood in Apex NC